HEAT CABLE SYSTEMS

Our Heat Cable Systems and Floor Insulation

Installing our heat cable system couldn't be easier. For the basics, all you need to do is make sure that the heat cable is properly inserted into the grooves in the HeatBoard. Remember that the heat cable needs to be inserted either into the groove of the HeatBoard or covered with thinsulate mortar. Our heat cable should never be doubled up or folded over itself. If you have excess cable at the end of an installation, make sure not to attempt to hide it in the wall or space them closer than 2 inches from another line of heat cable.


To get the most out of our heat cable systems you should install them in conjunction with floor insulation. This allows for maximum heat retention and helps keep your heat cables safe from any unintentional damage. contractors and customers are more than welcome to contact us for more information on how to best install our heat cable system.


Combining floor insulation with our heat cable system will give you the maximum value when it comes to heating your home. Heat naturally sises up and by starting your home’s heating it with your floor, you will allow the heat to naturally soak into the rest of the building. Other heating systems attempt to force hot air into buildings which is more energy intensive and also prone to leaking heat to the outside. In floor heating is one of the most efficient ways to make sure your home is warm enough when you need it to be.

 

HeatBoard Systems LLC

Kingsport, TN, USA

  • Facebook
  • Twitter

©2020 by HeatBoard Systems LLC. Proudly created with Wix.com