top of page

YOU MAY ALSO NEED...

My cart

Cart is empty

PLEASE READ BEFORE YOU PURCHASE

Know what to expect

ELECTRICAL REQUIREMENTS

  1. Consult an electrician concerning the voltage, amps, and wattage requirements. The heat cable will use 12 watts per square foot of heat.

  2. Make sure there is space in the electrical panel. 

  3. The heat cable kits can be ordered as 120V or 240V. However, the Mysa thermostat can be used for either voltage. Only 150 square feet can be used for a 120V system and 300 square feet for a 240V system. 

  4. The thermostat is GFCI protected. Do not install to a GFCI breaker. 

Contact

FLOORING REQUIREMENTS

  1. HeatBoard kits can only be used with tile 6"x6" or larger [porcelain, ceramic, or natural stone such as marble, slate, granite, and travertine]. DO NOT USE WITH HARDWOOD, VINYL, LAMINATE, OR CARPET. 

  2. The subfloor must be 5/8 exterior grade plywood or 23/32 OSB with Exposure 1 classification or better, complying with local building codes and ANSI A108.11.

Contact

HEAT CABLE WARRANTY

Limited 25 Year Warranty

bottom of page